Rock Mass Classification

Enter site parameters for the Q-system, RMR89, and GSI. Each system computes independently and feeds a combined rock class recommendation below.

Barton Q-System

Q = (RQD / Jn) × (Jr / Ja) × (Jw / SRF)

Rock Quality Designation. Minimum 10 used below 10%.
Q not yet calculated

Bieniawski RMR89

RMR = Σ (strength + RQD + spacing + discontinuity condition + groundwater) + orientation adjustment

Generalized scale; exact penalty depends on tunnel/slope/foundation orientation charts.
RMR not yet calculated

Geological Strength Index (GSI)

Estimate GSI from RMR89, or directly from rock structure and discontinuity surface quality.

Uses Hoek's correlation GSI ≈ RMR89 − 5, valid for RMR89 > 23 (dry conditions, zero orientation adjustment assumed in the RMR89 used).

GSI not yet calculated
GSI not yet calculated
Q
—
RMR
—
GSI
—

Recommended rock class

Awaiting input

Calculate at least one system above to see a classification. Calculating all three gives a combined recommendation.

Q-System—
RMR89—
GSI—

Q-system after Barton, Lien & Lunde (1974). RMR after Bieniawski (1989). GSI correlation after Hoek (1995) / Hoek & Marinos (2000). Values are engineering estimates for preliminary classification — verify against site-specific data and applicable design codes before use in design.